How to flash stock rom using by Sp flash tool

 How to flash stock rom using by Sp flash tool 

These are instructions to flash stock rom using smart phone tools on a computer
Tools needed:-MTK USB VCOM Driver, ADB Driver.
-Stock Rom for your MediaTek Device.
-Smart Phone Flash Tool. Click here for Sp flash tool

 Note:- MTK USB VCOM or ADB Driver must be installed before,
Step 1: Download and extract the stock firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver & Firmware
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4:Run Flash_Tool.exe as administrator.

Step 5:load the Download agent from the sp flash tool folder.
Step 6: load the Scatter File from the firmware folder.
Step 7: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.


Step 8: Connect your Smartphone (off mood) to the computer using the USB Driver.Than started flashing.

Step 9: Sit beside and wait for Green Ring will appear at the end of successful Flash.
Important Notes:[*] Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.




Facebook Comment